supporting membrane meaning in English
支持膜
Examples
- The surface of polyion composite membranes was uniform while the cross - section micrograph showed the separation layer was cross - linked with the support membrane very well
聚离子复合膜的表面致密无孔,截面层次清晰,基膜和复合膜结合紧密。 - Using paracetamol as template molecule , molecularly imprinted polymer membranes with supporting membrane were synthesized through in situ polymerization by uv irradiation
采用紫外光引发原位聚合的方法制备了具有支撑膜的扑热息痛分子印迹聚合物膜。 - Using paracetamol as template molecule , molecularly imprinted polymer membranes with supporting membrane were synthesized through in situ polymerization by uv irradiation
摘要采用紫外光引发原位聚合的方法制备了具有支撑膜的扑热息痛分子印迹聚合物膜。 - In this paper , the dynamic lbl polyion composite membranes were prepared by depositing polyacrilic acid and polyethyleneimine alternatively on the ultrafiltration support membrane under a certain pressure . the polyion composite membranes were evaluated by the pervaporation separation of water - ethanol mixture
采用动态lbl (动态层-层吸附)成膜方法,以聚丙烯酸为聚阴离子,聚乙烯亚胺为聚阳离子,一定压力下,在超滤膜上制备聚离子复合膜。 - The support membrane is polyethersulfone ultrafiltration membrane , the concentration of polyacrylic acid was selected at 0 . 05wt % , a suitable paa / pei ratio was 1 / 5 - 1 / 10 with a number of 4 bilayers . the molecular weight of paa was 4 000 000 . the corresponding filtration time of the first paa layer range was 10 minutes while the reaction time was 20 minutes
基膜选用聚醚砜超滤膜,聚丙烯酸浓度为0 . 05wt % ,聚丙烯酸与聚乙烯亚胺浓度配比为1 / 5 - 1 / 10 ,复合四层, paa分子量4000000 ,首层过滤时间10min ,过滤反应时间20min 。